Skip to content
Pathoster

Pathoster

PATHOSTER® 0.35% LONG ACTING is an innovative, high-level, sporicidal and virucidal disinfectant solution, activated and stabilised, based on 0.35% peracetic acid and hydrogen peroxide. Peroxydry and peracetic ions act synergistically, tripling the effectiveness of the individual radicals that compose them in a non-aggressive pH solution. PATHOSTER® 0.35% Long Acting is a two-component system.

  • 1000 ml pack
    • 930 ml Solution A
    • 70 ml Solution B

    5000 ml pack

    • 4650 ml Solution A
    • 350 ml Solution B
Categories: , , , Brand:

Solution A
100 g contain: isopropyl alcohol, ethyl alcohol, chelating agents, antioxidants, purified water.

Solution B (Activator)
100 g contain: peracetic acid 5 g, stabilized hydrogen peroxide, glacial acetic acid, corrosion inhibitors, purified water.

Solution (A+B)
Peracetic acid 0.35 g, hydrogen peroxide, isopropyl alcohol, stabilizers, corrosion inhibitors and purified water q.s. to 100 g.

PATHOSTER® 0.35% LONG ACTING provides broad-spectrum antimicrobial activity against viruses, bacteria, mycobacteria, fungi and spores, with rapid and direct disinfecting action even in the presence of organic material.

PATHOSTER® is highly reactive towards all functional groups of living matter, is not inactivated by catalase enzymes produced by organisms, and inhibits the vital processes of microorganisms. It is particularly indicated against emerging microorganisms characterized by high resistance and against easily transmissible biological agents.

All tests were performed in accordance with EN 14885:2015:

VIRUCIDAL ACTIVITY
Applied method: EN 14476. Quantitative test for the evaluation of virucidal activity on instruments used in the medical area.

BACTERICIDAL ACTIVITY
Applied method: EN 14561. Quantitative test for the evaluation of bactericidal activity on instruments used in the medical area.

FUNGICIDAL ACTIVITY
Applied method: EN 14562. Quantitative test for the evaluation of fungicidal activity on instruments used in the medical area.

MYCOBACTERICIDAL ACTIVITY
Applied method: EN 14348 – EN 14563. Quantitative suspension test for evaluating mycobactericidal activity on instruments used in the medical area, in the presence of interfering substances.

SPORICIDAL ACTIVITY
Applied method: EN 13704 – EN 14347. Quantitative suspension test for evaluating sporicidal activity on instruments used in the medical area, in the presence of interfering substances.

The device can be used: (A) for immersion, (B) for spraying, (C) in endoscope washer-disinfectors.

  1. Ready-to-use solution – Immersion disinfection
    Preparation:
    – Pour the entire contents of solution A and solution B into a container equipped with a lid.
    – Immerse the instruments and allow a contact time of 15 minutes.
    – Rinse.
  2. Ready-to-use solution – Spray disinfection
    Preparation:
    – Pour solution B (activator) into the bottle containing solution A (stabilizer).
    – After screwing on the appropriate spray nozzle, spray the product directly onto the surfaces of the invasive devices to be treated and allow a contact time of at least 15 minutes.
    – Rinse.
    For additional activities, refer to the table “Activity and Spectrum of Action”.
  3. Ready-to-use solution – Disinfection in endoscope washer-disinfectors
    Preparation:
    – Pour the entire contents of solution A and solution B according to the manufacturer’s instructions of the endoscope washer-disinfector.
    – Allow a contact time of 15 minutes.
    – Rinse.
    The product may be used for multiple disinfection cycles, subject to verification that the peracetic acid content is above 1500 ppm.

Accessibilità